2007 Newman K-20 Doouble End Trim Saw in Good Condition, READY FOR IMMEDIATE DELIVERY. The frame is welded to assure permanent alignment. The trimmer is constructed using 6″ (152mm) steel channel and angle iron, accurately fitted, making an exceptionally rigid frame. Saw units are powered by individual 7-1/2 HP (5.6 kw), 1800 RPM, 3/60/230-460 volt TEFC motors, using V-belt drive for each saw arbor. The feed system is powered by a 1-1/2 HP (1.1 kw), 1800 RPM, gearmotor with variable frequncy drive, 3/60/230-460 volt. Saw arbors are 1-11/16″ (43mm) in diameter and are equipped with double interlock bearings. MAXIMUM CUT LENGTH: 20′ (6.1 m) MINIMUM CUT LENGTH: 6′ (1829 mm) ,4′ (1219 mm) MAXIMUM CUT THICKNESS: 7″ (178 mm) ACCURACY: +/- 1/32″ (0.8 mm) FEED SPEEDS: 20 to 60 FPM (6.1 to 18.3 m/min.) FEED CHAINS: #60 roller chain FEED DRAGS: 6 at 22″ (559 mm) intervals SAW BLADES: 22″ (559 mm) carbide, 60 teeth, 1-1/2″ (38.1 mm) bore, 10 gauge (3.4mm) FLOOR SPACE: 20′-8″ (6.3 m) x 6′ (1.8 m) WEIGHT: Approximately 3500 lbs. (1590 kg)