In the wood product industry since 2013 we offer mill direct materials suited for your needs. We offer both green rough cut lumber and planned kiln dried shaped lumber to the public. V - Joint, Shiplap, Paneling, Sidding, Flooring, Molding and Wide Slabs are a few of our most popular requests.

— Pine Board and Batten siding
1'x 12” wide boards ---------------- $1.25 a foot 8' to 12' lengths are available for this price. We can cut longer lengths.
Board and Batten siding is popular for its rustic look and also its economical price and rapidity of installation -- the boards may be installed “green”, without being dried. Some people like to use wider battens and put them over the cracks while every thing is still green, others like to install the 1 x 12 boards on the wall and a few months later after they have dried a bit than put up the batten strips.
1x3 or 1x4 batten stripes are available. When ordered along with 1x12 siding the combined board and batten price is $1.45 a board foot

— Live Edge or Straight Cut Lap Siding
Available in 1x6, 1x8, 1x10 or 1x12 widths.
This is a simple yet effective siding covering. One board simply laps over the top of the one below it and sheds rain well. We are able to make wedge shaped lap siding that is thinner on the top edge to stack more flush. These are called something like “Wedge Board Lap Siding.”

Please contact our log to lumber sawmill facility in Alto, Texas for all rough cut products.
Custom Cut Lumber Office 936-221-583one


Following is some of the shaped wood products we offer. These are manufactured at Custom Cut Millwork planner shop in Wells, Texas # 936-256-305nineu more contact info below

— 6' HALF-LOG SIDING (tongue and groove edges for easy
weather-resistant assembly)
Pine ------------ $2.80 a square foot
Cedar ---------- $4.75 a square foot


— We mill 8 inch wide, 6 inch and 4 inch V-Joint or Shiplap paneling for interior wall covering and outdoor siding in both Pine and Cedar.

Knotty Pine shaped wood products are very popular and creates a very distinctive rustic style. Its yellow color darkens to a sunshine tone over time. Its features include varied color and distinct wood grain patterns. It is easy to work with and accepts very well coatings of stain, paint and whitewash. This is a good product that it is rather quick to put up. When installed correctly it hides the cracks between the boards and is nearly air tight making for good insulation value.

PINE V-JOINT or SHIPLAP

1x8 V-Joint / Shiplap ----------- $2.10 a square foot

1x6 V-Joint / Shiplap ------------- $1.85 a square foot ( 8'- 10' lengths) longer lengths available

1x4 V-Joint / Shiplap ------------- $1.80 a square foot

- CEDAR
1x6' V-Joint or Shiplap----------- $2.75 a square foot)
Also available in 4' widths

V-Joint and Shiplap can be used for both Interior and Exterior Applications:
- Wall Covering
- Wainscoting
- Ceilings
- Outdoor Siding
- Porch Ceiling
- Soffit Roof Eaves Enclosure

We also offer other related quality building products.

— 2 x 6 Pine Flat Tongue and Groove for roof underlayment planking/ ceiling boards and siding.
2 x 6 pine V-Joint $2.80 a square foot

This wood product comes out to 1-1/2' thick after it is molded. It is V-Joint shaped with beveled edges on the bottom side and works well for vaulted ceilings - making a beautiful exposed
ceiling. The top side is flat and ready to apply felt paper before
laying on the roof. The planking is strong and capable for the roof
load weight. When felt paper and a layer of foam insulation is added,
the surface is prepared for sheet metal roofing to be applied directly
on top and fastened to the V-Joint.

— 1x6 Pine Historic Reproduction #117 Double Teardrop shiplap siding.
Pine #117 shiplap --------------------------- $1.95 a square foot

— 1x6 Pine #105 Drop Shiplap Siding ----------------- $1.85 a square foot

— 1x6 Pine Beveled Siding ----------------- $2.05 a square foot

— PINE FLOORING
1x6 inch ------------------------- $1.85 a square foot
Also available in 3 1/2 inch widths

— Oak Tongue and Grove Flooring
Call for pricing


— 1x3 Crown Molding
Pine ------------------------- $2.00 a Linear foot
Cedar ------------------------ $3.50 a Linear foot



Custom Cut MILLWORK is located at 502 Rusk Avenue suite 1 in Wells, Texas 75976. The facility is right off highway 69 across the highway from county road 2743. The 502 address DOES NOT ALL WAYS SHOW UP ON GOOGLE MAPS or gps. It does at times. The best way to find it is to put in R n R Mercantile Wells, Texas. You will see an unused gas station and plenty of stacks of lumber around. Wells is positioned right along the Highway 69 route halfway between Dallas and Houston. East Texas is one of the best wooded areas of the state and grows some very fine quality wood which we are pleased to provide mill direct to the public.

We can deliver to customers in the local towns and cities of Dallas, Fort Worth, Denton, Plano, Garland, Mesquite, Arlington, Irving, Abilene, Sulphur Springs, Texarkana, Mount Pleasant, Tyler, Mineola, Lindale, Kilgore, Longview, Marshall, Henderson, Carthage, Shreveport, Athens, Corsicana, Jacksonville, Palestine, Crockett, Rusk, Bullard, Wells, Alto, Nacogdoches, Mount Enterprise, Timpson, Center, Huntington, Zavalla, Diboll, Corrigan, Woodville, Lufkin, Beaumont, Killeen, Jerrell, Austin, Temple, Round Rock, Lakeway, San Marcos, New Braunfels, San Antonio, Seguin, Victoria, Sweeny, Corpus Christi, Huntsville, Livingston, Conroe, Houston, Lake Charles, Seabrook, Galveston, and more.
We serve the nearby states of Oklahoma, Louisiana, Tennessee, Arkansas, Alabama, Mississippi, Florida, Kansas, Missouri, New Mexico, and Colorado and can send trucks anywhere in the lower 48 states.

Truck shipping available.
We accept major credit cards.
*************************************************************************
CUSTOM CUT MILLWORK

For more information see our sawmill facility wwwDOTCustomCutLumberMillDOTcom

Office hours for lumber pickups and customer inquiries are 8am to 3 pm Monday - Friday

For questions and sales
Text 936-256-305nine
or Email: 502planershopATgmail.com

*** Para Espanol: (Spanish)
Clientes que hablan español por favor dejen un mensaje de voz que indique lo que necesita en nuestro teléfono de la oficina (936) 221-583uno. Intentaremos comunicarnos con usted lo antes posible.

=====
Need a different kind of Lumber?
You can contact our affiliated Sawmill log processing facility Custom Cut Lumber in Alto, Texas. They provide cedar, pine and hardwood lumber. Oak trailer decking, pine framing lumber, cedar lumber and fence posts, beams up to 32 feet long, live edge slabs and much more.

*************************************************************************
Tags # Building Material, Manufacturing, Boards, Saw Mill, Hardware Store, Home Repair, House, Barn, Remodel, Kitchen and Bath, Construction, Carpentry, Woodworking, Logging, Timber, Sawmill, Industrial Lumber Supply, Sale, Cabinet Shop, Sawing, Log Milling Service, Wood Product Sales, Molder, Kiln dry, Crown, Baseboard, Trim